Hikvision DS-2XS6A87G1-LS/C36S80 8MP ColorVu Fixed Bullet Solar Power 4G Network Camera Kit



Tax included Shipping calculated at checkout

The Hikvision DS-2XS6A87G1-LS/C36S80 8MP ColorVu Fixed Bullet Solar Power 4G Network Camera Kit, can be used in the areas that are not suitable for laying wired network and electric supply lines, or used for the scenes that feature tough environment and have high demanding for device stability. It can be used for monitoring the farms, electric power cables, water and river system, oil pipelines and key forest areas.

This Hikvision 8MP ColorVu Bullet Solar camera can be used in the temporary monitoring scenes, such as the large-scale competitions, the sudden public activity, the
temporary traffic control and the city construction. Hikvision ColorVu technology provides 24/7 vivid colorful images with F1.0 advanced lenses and high performance sensors. F1.0 super-aperture collects more light to produce brighter images. Advanced sensor technology can vastly improve the utilization of available light.


  • High quality imaging with 3840 × 2160@ 15 fps resolution
  • 24/7 Colorful imaging
  • Clear imaging against strong back light due to 130 dB true WDR technology
  • Focus on human and vehicle targets classification based on deep learning
  • 80 W photovoltaic panel, 360WH chargeable lithium battery
  • Support battery management, battery display, battery high-low temperature protection, charge-discharge protection, low-battery sleep protection and remote wakeup
  • LTE-TDD/LTE-FDD/WCDMA/GSM 4G wireless network transmission, support Micro SIM card
  • Camera: Water and dust resistant (IP67)
  • Built-in 64 GB eMMC storage




Image Sensor

1/1.2" Progressive Scan CMOS

Max. Resolution

3840 × 2160

Min. Illumination

Color: 0.0005 Lux @ (F1.0, AGC ON), B/W: 0 Lux with white light

Shutter Time

1 s to 1/100,000 s



Focal Length & FOV


2.8 mm, horizontal FOV: 101.6°, vertical FOV: 52.4°, diagonal FOV: 124°

4 mm, horizontal FOV: 88.0°, vertical FOV: 47.0°, diagonal FOV: 104.3°

Lens Type

Fixed focal lens, 2.8 and 4 mm optional

Iris Type


Lens Mount








2.8 mm: D: 96 m, O: 38 m, R: 19m, I: 9.5 m

4 mm: D: 107 m, O: 42 m, R: 21 m, I: 10 m



Supplement Light Type

White Light

Supplement Light Range

Up to 30 m

Smart Supplement Light




Main Stream


50 Hz: 12.5 fps (3840 × 2160, 2688 × 1520, 1920 × 1080, 1280 × 720)

60 Hz: 15 fps (3840 × 2160, 2688 × 1520, 1920 × 1080, 1280 × 720)



50 Hz: 12.5 fps (640 × 480, 640 × 360)

60 Hz: 15 fps (640 × 480, 640 × 360)

Third Stream


50 Hz: 1 fps (1280 × 720, 640 × 480)

60 Hz: 1 fps (1280 × 720, 640 × 480)

Video Compression


Main stream: H.265

Sub-stream: H.264/H.265/MJPEG

Third Stream: H.265/H.264

*Performance mode: main stream supports H.265+

Video Bit Rate

32 Kbps to 16 Mbps

H.265 Type

Main Profile

Bit Rate Control


Scalable Video Coding (SVC)

H.265 encoding

Region of Interest (ROI)

4 fixed regions for main stream



Audio Compression


Audio Bit Rate


64 Kbps (G.711ulaw/G.711alaw)/16 Kbps (G.722.1)/16 Kbps (G.726)/32 to 192 Kbps

(MP2L2)/8 to 320 Kbps (MP3)/16 to 64 Kbps (AAC-LC)

Audio Sampling Rate

8 kHz/16 kHz/32 kHz/44.1 kHz/48 kHz

Environment Noise Filtering




Simultaneous Live View

Up to 6 channels


Open Network Video Interface (Profile S, Profile G, Profile T), ISAPI, SDK, ISUP




SNMP, IGMP, 802.1X, QoS, IPv6, UDP, Bonjour, SSL/TLS, WebSocket, WebSockets


Up to 32 users. 3 user levels: administrator, operator and user



Password protection, complicated password, HTTPS encryption, 802.1X authentication

(EAP-TLS, EAP-LEAP, EAP-MD5), watermark, IP address filter, basic and digest

authentication for HTTP/HTTPS, WSSE and digest authentication for Open Network

Video Interface, RTP/RTSP over HTTPS, control timeout settings, TLS 1.2, TLS 1.3

Network Storage


NAS (NFS, SMB/CIFS), auto network replenishment (ANR)

Together with high-end Hikvision memory card, memory card encryption and health

detection are supported.


Hik-Connect (proactive mode also supports), Hik-central Professional

Web Browser


Plug-in required live view: IE 10+

Plug-in free live view: Chrome 57.0+, Firefox 52.0+

Local service: Chrome 57.0+, Firefox 52.0+

Mobile Communication


SIM Card Type





LTE-TDD: Band38/40/41

LTE-FDD: Band1/3/5/7/8/20/28

WCDMA: Band1/5/8

GSM: 850/900/1800MHz

DS-2XS6A87G1-LS/C32S80 (US):

LTE-FDD: Band2/4/5/12/13/66/71

WCDMA: Band2/4/5

DS-2XS6A87G1-LS/C32S80 (LA):

LTE-TDD: Band38/40

LTE-FDD: Band1/2/3/4/5/7/8/12/17/28/66

WCDMA: Band1/2/3/4/5/8

GSM: 850/900/1800/1900MHz

DS-2XS6A87G1-LS/C32S80 (JP):

LTE-TDD: Band41

LTE-FDD: Band1/3/8/11/18/19/21/26/28

WCDMA: Band1/6/8/19









Wide Dynamic Range (WDR)

130 dB

Day/Night Switch

Day, Night, Auto, Schedule

Image Enhancement

BLC, HLC, 3D DNR, Defog

Image Parameters Switch


Image Settings


Saturation, brightness, contrast, sharpness, gain, white balance adjustable by client

software or web browser


≥ 52 dB

Privacy Mask

4 programmable polygon privacy masks




1 RS-485 (half duplex, connect to external battery)



1 input (line in), max. input amplitude: 3.3 Vpp, input impedance: 4.7 KΩ, interface

type: non-equilibrium,

1 output (line out), max. output amplitude: 3.3 Vpp, output impedance: 100 Ω,

interface type: non-equilibrium


1 input(s), 1 output(s) (max. 12 VDC, 1 A)

On-Board Storage


Built-in memory card slot, support microSD card, up to 256 GB;

Built-in 64 GB eMMC storage

Reset Key


Ethernet Interface

1 RJ45 10 M/100 M self-adaptive Ethernet port

Power Output

12 VDC, max. 1000 mA



Basic Event


Motion detection, video tampering alarm, exception (network disconnected, IP

address conflict, illegal login, HDD error)

Smart Event


Line crossing detection, Intrusion detection, region entrance detection, region exiting

detection, unattended baggage detection, object removal detection, scene change

detection, face detection

*Smart events are only supported under performance mode.



Upload to FTP/NAS/memory card, notify surveillance center, send email, trigger

recording, trigger capture, trigger alarm output, audible warning





12 VDC ± 20%, 4-pin M8 waterproof connector

1. Standby power consumption: 53 mW

2. The average power consumption of 24 hours: 2 W (4G transmission is excluded).

3. The max. power consumption: 3.2 W


Front cover: metal, body: metal, bracket: metal



882.6 mm × 706.3 mm × 760 mm (34.8" × 27.8" × 29.9") (Max. size of the camera after

it is completely assembled)

Package Dimension

862 mm × 352 mm × 762 mm (33.9" × 13.9" × 30.0")


Approx. 30.2 kg (66.5 lb.)

With Package Weight

Approx. 36.3 kg (80.0 lb.)

Storage Conditions

-20 °C to 60 °C (-4 °F to 140 °F). Humidity 95% or less (non-condensing)

Startup and Operating


-20 °C to 60 °C (-4 °F to 140 °F). Humidity 95% or less (non-condensing)



33 languages: English, Russian, Estonian, Bulgarian, Hungarian, Greek, German, Italian,

Czech, Slovak, French, Polish, Dutch, Portuguese, Spanish, Romanian, Danish, Swedish,

Norwegian, Finnish, Croatian, Slovenian, Serbian, Turkish, Korean, Traditional Chinese,

Thai, Vietnamese, Japanese, Latvian, Lithuanian, Portuguese (Brazil), Ukrainian

General Function


Anti-banding, heartbeat, mirror, privacy mask, flash log, password reset via email, pixel




Battery Type



360 WH (90 WH for each battery)

Battery Voltage

10.8 V

Max. Output Voltage

12.6 V

Operating Temperature


Charging: -20 °C to 45 °C (-4 °F to 113 °F)

Discharging: -20 °C to 60 °C (-4 °F to 140 °F)

Cycle Lifetime


Performance mode: 5 days, Proactive mode: 8 days, Standby mode: 80 days

*in cloudy/rainy days (25 °C)

Battery Life

More than 500 cycles

Battery Weight

Approx. 3.3 kg (7.3 lb.)

Extended Dimension

221 mm × 84 mm × 37.3 mm (8.7" × 3.3" × 1.5")





CE-EMC (EN 55032: 2015, EN 61000-3-2:2019, EN 61000-3-3: 2013+A1:2019, EN

50130-4: 2011+A1: 2014);

RCM (AS/NZS CISPR 32: 2015);

FCC (47 CFR Part 15, Subpart B);

IC (ICES-003: Issue 7)



CE: CE-RED (EN 301908-1,EN 301908-2,EN 301908-13, EN 301511,EN 301489-1,EN

301489-52,EN 62133);

ICASA: same as CE-RED

FCC ID (47 CFR Part15 Subpart C);

IC ID (RSS-132 Issue 3, RSS-133 Issue 6, RSS-139 Issue 3, RSS-130 Issue 2, RSS-102 Issue


MIC (Article 49-6-4 and 49-6-5 the relevant articles and MIC Notice No. 1299 of the

Ordinance Regulating Radio Equipment)



CB (IEC 62368-1:2014+A11)

CE-LVD (EN 62368-1:2014/A11:2017)

LOA (IEC/EN 60950-1)



CE-RoHS (2011/65/EU);

WEEE (2012/19/EU);

Reach (Regulation (EC) No 1907/2006)



Camera: IP67 (IEC 60529-2013)

Wind resistance 12 level, up to 40 m/s wind speed resistance



Quick Start Guide

User Manual

AfterPay: Shop Now, Enjoy Now, Pay Later


Pay For Your Purchases Over Four Simple Instalments

Pay for your purchase over four (4) instalments, due every two (2) weeks. Afterpay makes it simple to pay when it suits you best.

Pay Nothing Extra When You Pay On Time

If you make repayments on time, you'll only ever pay the price of the item you've purchased. The only fees Afterpay charges are late fees for missed payments.

No New Card Applications, Instant Approval Online

Forget about long, complicated application forms. Afterpay's proprietary platform makes it quick and easy to get approved instantly and keep shopping.

To be eligible for Afterpay, you need:

  • A valid Australian credit/debit card (Visa/Mastercard);
  • To be at least 18 years old; 
  • To have an Australia residential address; and
  • Have a valid Australian mobile number

To make a purchase with Afterpay online:

  • Add a product(s) to your cart and proceed to checkout.
  • Select Afterpay as your payment method on the last page of checkout. You will then be redirected to Afterpay's website to login or create an Afterpay account.
  • After successful login/registration, you will be returned to the iCam's website to complete your transaction.

After your transaction with us:

  • Online purchases will be processed and shipped according to our regular shipping schedules.
  • Payments will be made to Afterpay in four (4) instalments. The first instalment will be charged to your credit/debit card immediately upon purchase.
  • The remaining instalments will be deducted from your credit/debit card fortnightly over a period of six (6) weeks.


  • iCam's normal return policy is in effect for all Afterpay purchases.
  • Refunds are credited back to your Afterpay account.
  • Refer to iCam's returns policy.


What is Afterpay?

Afterpay is a payment method that offers interest-free payment plans for your online purchases. Afterpay settles your payment up-front with iCam so you can enjoy your purchase straight away. Simply purchase what you want today and pay for it over four (4) fortnightly instalments.

Who can use Afterpay?

Any Australian citizen or permanent resident who is 18 years or older may be eligible for an Afterpay account. You will need to have a valid and verifiable email address and mobile phone number and use an Australian credit or debit card to make the purchase.

How much does it cost?

You will not be charged a fee when you choose Afterpay as your payment option. You are required to pay your instalments directly to Afterpay within the payment schedule. Late fees are applied if the payment due is not received by Afterpay. Visit the Afterpay website for further details.

How do I make repayments and when are my instalments due?

For customers using Afterpay for the first time, you will be required to provide your payment details and make your first payment at the time of purchase. The remaining three (3) payment instalments will automatically be deducted each fortnight over the remaining six (6) weeks.

After your first purchase transaction, each subsequent payment instalment will be debited 14 days later, unless voluntary payments are made. Afterpay automatically deducts the payment instalments from your debit or credit card each fortnight.

You can log into your Afterpay account to view your payment schedule at any time and make a payment before the due date.

Is there a minimum order value for Afterpay?

Afterpay can be used for all online purchases where the order total is below $1,000, subject to Afterpay's approval.

When will your order be shipped?

When you pay with Afterpay, your order is processed by our fulfilment centres and delivered to you in accordance with our delivery times.

Are there any exclusions to what can be purchased with Afterpay?

Gift cards cannot be purchased with Afterpay.

More questions?

Call: 1300 100 729

Email: info@afterpay.com.au

For more information visit: https://www.afterpay.com.au

How does Laybuy work?

Laybuy lets you receive your purchase now and spread the total cost over 6 weekly automatic payments. Interest Free.

Step 01

Proceed to checkout as normal and select Laybuy as your payment method.

LayBuy | The Smart Way To Pay

Step 02

Log in or sign up and complete your order in seconds.

LayBuy | The Smart Way To Pay

Step 03

Choose your payment day, view your schedule and select pay now.

LayBuy | The Smart Way To Pay

Step 04

You're done! Your items are on their way. Payments will be taken each week automatically.

Shopping online with Laybuy

In a nutshell...

Laybuy lets you receive your purchase now and spread the total cost over 6 weekly automatic payments. Interest Free.

  • LayBuy | The Smart Way To Pay

    Proceed to checkout as normal and select Laybuy as your payment method.

  • LayBuy | The Smart Way To Pay

    Log in or sign up and complete your order in seconds.

  • LayBuy | The Smart Way To Pay

    Choose your payment day, view your schedule and select pay now.

  • LayBuy | The Smart Way To Pay

    You're done! Your items are on their way. Payments will be taken each week automatically.

LayBuy | The Smart Way To Pay
LayBuy | The Smart Way To Pay

Easy payments at your fingertips

Manage all your payments both online and in store via your dashboard. Complete multiple payments at once, track your spending and much more.

Update your card details, manage upcoming payments and always be in control of your money.

LayBuy | The Smart Way To Pay

LayBuy | The Smart Way To Pay

Returns made easy

We all know what it’s like when somethings just not right. That’s why we have made returns simple. Just follow the merchants returns process and we will handle the rest.

Once your refund has been accepted, your remaining payment schedule will be adjusted or cancelled and all funds paid will be refunded back onto your card.

Ready to start shopping?

Payment & Security

6 weekly interest-free payments with  More info

American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa

Estimate shipping

Customer Reviews

Be the first to write a review

You may also like

Recently viewed